Kubota 165-manufacture,factory,supplier from China

The Kubota KX165 is a compact excavator renowned for its adaptability and efficiency in confined work spaces. Its compact size and minimal tail swing allow it to operate effectively in urban environments, landscaping projects, and sites with limited access. This makes it a popular choice for tasks such as utility work, residential construction, and indoor demolition.Powering the KX165 is a Kubota engine known for its reliability and fuel efficiency.

- Dimensions: The operating weight of the Kubota U35 - 3S is approximately 3.5 tons. The overall length (with standard bucket) is around 4.2 meters, the width is about 1.5 meters, and the maximum digging height can reach around 4.7 meters.- Engine: It is powered by a Kubota - made diesel engine. The engine displacement and power output are designed to meet the demands of typical small - scale excavation work while maintaining good fuel economy. The engine is also compliant with relevant emission standards.- Bucket Capacity: The standard bucket capacity is usually around 0.11 cubic meters.

Kubota U30 excavatorWorking weight: 3648kgBucket capacity: 0.08m³Rated power: 18.5kW/2200rpmEngine model: D1703-E4Displacement: 1.647LSlewing speed: 9rpmTravel speed: 3.0/4.6km/hGradability: 30°Bucket digging force: 29.5kNFuel tank capacity: 45.1LTotal transport length: 4573mmTotal transport width: 1550mmTotal transport height: 2482mmTotal track length: 2081mmTrack shoe width: 300mmMinimum ground clearance: 287mmMinimum turning radius of front working device: 2164mmRear end turning radius: 900mmMaximum digging radius: 4951mmMaximum digging depth: 2825mmMaximum digging height: 4558mmMaximum unl

EngineEngine model: CAT C2.2 DIGross engine power: 34.1 KWService and refill capacityCooling system: 10 LEngine oil: 8 LHydraulic oil tank: 58 LFuel tank: 165 LHydraulic systemWorking pressure - equipment: 25,200 kPaWorking pressure - travel: 25,200 kPaWorking pressure - swing: 21,600 kPaWeightOperating weight: 5,600 kgDriveTravel speed - high speed: 3.8 km/hMaximum traction: 41.5 kN

Basic specificationsWorking weight of the whole machine: 5190kgBucket capacity: 0.16-0.19m³Standard bucket width: 730mm with side teeth, 680mm without side teethBody size: 5510mm in length, 2540mm in height, 1960mm in widthMinimum ground clearance: 320mmEngineModel: V2403-E3Total displacement: 2.434LRated output power: 40.7PS (29.9kW)/2250rpm or 40PS (29.2kW)/2200rpmFuel tank capacity: 100LDigging performanceMaximum digging height: 5560mmMaximum unloading height: 3855mmMaximum digging depth: 3580mmMaximum vertical digging depth: 2990mmMaximum digging radius: 6045mmBoom offset: UnspecifiedFront

Machine working weight: 1805kgBucket capacity: 0.035m³Rated power: 12.1kW/2400rpmEngine model: D902-E4Displacement: 0.898LSlewing speed: 9.5rpmTravel speed: 1.9/3.9km/hGradability: 30°Bucket digging force: 15.2kNFuel tank capacity: 19LTotal transport length: 3545mmTotal transport width: 990/1240mmTotal transport height: 2340mmTotal track length: 1585mmTrack shoe width: 230mmMinimum ground clearance: 150mmMinimum turning radius of front working device: 1440mmRear end turning radius: 620mmMaximum digging radius: 3900mmMaximum digging depth: 2310mmMaximum digging height: 3540mmMaximum unloading h

Basic specificationsWorking weight of the whole machine: 5595kgBucket capacity: 0.22m³Total length for transport: 5500mmTotal width for transport: 1960mmTotal height for transport: 2550mmTotal length of crawler tracks: 2500mmWide track shoe: 400mmMinimum ground clearance: 310mmMinimum turning radius of front working device: 2460mmRear end turning radius: 1045mmEngineEngine model: V2607-E3Rated power: 48.3PS (35.5kW)/2200rpmDisplacement: 2.615LPerformanceSlewing speed: 9.3rpmTravel speed: 2.7/4.6km/hGradability: 30°Bucket digging force: 40.1kNHydraulic systemMain pump type: variable pump ×2 + g

The Cat 307D is a compact and versatile mini hydraulic excavator designed for efficient operation in confined spaces. Its size makes it particularly well-suited for urban construction, landscaping, utility work, and other projects with limited access. This machine offers a balance of power, maneuverability, and fuel efficiency, making it a popular choice for contractors and rental fleets.One of the key strengths of the 307D is its ability to operate in tight quarters.

1.Introduction of the productThe CAT ® 320 GC balances outstanding performance with reduced costs. The National 4 320 GC is more fuel-efficient, eliminates the need for urea solution, and requires no downtime for regeneration, increasing uptime.

The Cat 323D2 is a hydraulic excavator that builds upon the legacy of previous models, offering a blend of performance, reliability, and operator comfort. While it's not the newest generation of Cat excavators, it remains a popular choice in many markets due to its proven track record and robust design.  The 323D2 is designed for a variety of applications, including general construction, excavation, demolition, and utility work. Its size and capabilities make it suitable for medium to heavy-duty tasks.

Engine Engine type: CAT C1.1 Gross engine power: 16.1 kW (ISO 14396)Service and repair refill capacity Cooling system: 3.9 LEngine oil: 4.4 L Hydraulic oil tank: 18 L Fuel tank: 22 L Hydraulic system Operating pressure - equipment: 245 bar Operating pressure - travel 245 bar Operating pressure - swing 147 bar Weight Minimum operating weight: 1,786 kg Maximum operating weight: 1,843 kg Drive Travel speed - high speed: 4.4 km/h Maximum traction: 18.4 kN

Control System: Electronic hydraulic controlsCabin Type: Enclosed, air-conditionedSeat: Adjustable, ergonomic designDisplay: Digital display with real-time machine data and operational statusJoystick Controls: Dual joystick controls for smooth and precise operationSafety Features:Reverse Warning SystemTilt Alarm SystemOperator Protection SystemSafety Locking MechanismEnvironmental Monitoring System The CAT 301.7 is a high-performance, fuel-efficient, and operator-friendly mini excavator designed for a wide range of applications.

Brand: Caterpillar (CAT)Model: 320GX Hydraulic ExcavatorOperating Weight: 20,500 kgEngine Power: 108 kW (145 HP)Bucket Capacity: 0.93 m³ (Standard Bucket)Dimensions: 9.47 m × 2.99 m × 3.09 m (L×W×H)Condition: NewEngine Model: CAT C4.4Hydraulic Flow Rate: 300 L/minMax Digging Depth: 6.57 mMax Reach at Ground Level: 9.89 m

1.Introduction of the productThe CAT ® 313 GC eliminates pilot control and case drain filters, extends change intervals for fuel, hydraulic oil and air filters, eliminates the need for urea solution, saves time and hassle, is as reliable and durable as ever, and optimizes operational performance.2.ParametersMotorEngine ModelCat® C3.6Engine power74.4 kWNet power70.6 kWBore99 mmStroke120 mmDisplacement3.6 LWorking weightWorking weight12,400 kgSlewing mechanismSlewing speed11.5 rpmMaximum Slewing Torque43 kN·mHydraulic systemMain system-maximum flow rate (machine)247 L/minMaximum pressure-equipme

1.Introduction of the productThe National IV CAT ® 320 GX moves faster than the National III 320 GX, with a significant increase in production; no need for urea solution, reliable exhaust aftertreatment device, no maintenance during the life cycle, and no need for special stops for regeneration, which increases operating time, and the whole machine is configured in a simple and reliable way, which makes it a cost-effective new classic 20-class-ton excavator, with a better return on the table class of customers.2.ParametersMotorEngine modelCat® C4.4Engine power110 kWNet power105.6 kWBore105 mmS

1.Introduction of the productThe CAT ® 320 GC balances outstanding performance with reduced costs. The National 4 320 GC is more fuel-efficient, eliminates the need for urea solution, and requires no downtime for regeneration, increasing uptime.

Brand: Caterpillar (CAT)Model: 320GX Hydraulic ExcavatorOperating Weight: 20,500 kgEngine Power: 108 kW (145 HP)Bucket Capacity: 0.93 m³ (Standard Bucket)Dimensions: 9.47 m × 2.99 m × 3.09 m (L×W×H)Condition: NewEngine Model: CAT C4.4Hydraulic Flow Rate: 300 L/minMax Digging Depth: 6.57 mMax Reach at Ground Level: 9.89 m

Machine Weight20930 KGHydraulic Cylinder BrandCATHydraulic Pump BrandCATHydraulic Valve BrandCATCore ComponentsPressure vessel, motor, Other, Bearing, Gear, Pump, Gearbox, Engine, PLC, VAVLEYear2021Place of OriginJapanMachinery Test ReportProvidedVideo outgoing-inspectionProvidedTypeHydraulic Crawlerl ExcavatorBrandCAT BrandModelCAT 320DOriginJapanLocationShanghaiConditionExcellent ConditionAdvantagesHydraulic StabilityFeatureMultifuctionExcavatorHeavy Construction Equipment Crawler Excavator

Control System: Electronic hydraulic controlsCabin Type: Enclosed, air-conditionedSeat: Adjustable, ergonomic designDisplay: Digital display with real-time machine data and operational statusJoystick Controls: Dual joystick controls for smooth and precise operationSafety Features:Reverse Warning SystemTilt Alarm SystemOperator Protection SystemSafety Locking MechanismEnvironmental Monitoring System The CAT 301.7 is a high-performance, fuel-efficient, and operator-friendly mini excavator designed for a wide range of applications.

The Cat 374D is a powerful and versatile hydraulic excavator designed for heavy-duty applications. It's commonly found in demanding environments like quarries, mines, and large-scale construction sites. Here's a breakdown of its key features and capabilities:The 374D is known for its high productivity. Its robust design and powerful engine allow it to move large volumes of material quickly and efficiently. This makes it a popular choice for tasks involving heavy digging, loading large trucks (like the Cat 773E), and other demanding earthmoving operations.

The CAT 313 Excavator is a medium-sized crawler machine designed for high productivity, low fuel consumption, and reliability.

1.Introduction of the productThe National IV CAT ® 320 GX moves faster than the National III 320 GX, with a significant increase in production; no need for urea solution, reliable exhaust aftertreatment device, no maintenance during the life cycle, and no need for special stops for regeneration, which increases operating time, and the whole machine is configured in a simple and reliable way, which makes it a cost-effective new classic 20-class-ton excavator, with a better return on the table class of customers.2.ParametersMotorEngine modelCat® C4.4Engine power110 kWNet power105.6 kWBore105 mmS

The CAT 330GC Excavator is a highly efficient and durable medium-sized crawler machine designed to meet the needs of a variety of construction, mining, and material handling projects. It combines performance, fuel efficiency, and low operating costs, making it an excellent choice for contractors and businesses looking for reliable and economical machinery.Engine and Power SystemThe CAT 330GC is powered by a [specific engine model], providing [XX kW] of power.

The CAT 350 Crawler Excavator is a high-performance, heavy-duty excavator designed for the toughest applications. Whether you're working on large-scale construction projects, mining operations, or infrastructure development, the CAT 350 offers the power, efficiency, and durability you need to get the job done.Engine and Power SystemThe CAT 350 is powered by a high-output [specific engine model] engine that delivers [XX kW] of power. The engine is designed for maximum fuel efficiency, ensuring that the excavator performs optimally while keeping operating costs low.